FEATURES
1. Powerful instruction set (173 instructions).
Binary addition, subtraction, BCD adjusts, logical operation in direct and index addressing mode.
Single-bit manipulation (set, reset, decision for branch).
Various conditional branches.
16 working registers and manipulation.
Table look-up.
LCD driver data transfer.
2. Memory capacity.
ROM capacity 4096 x 16 bits
Data RAM capacity 512 x 4 bits.
3. Input/output ports.
Port IOA 4 pins (with internal pull-low), muxed with SEG24~SEG27.
Port IOB 4 pins (with internal pull-low), muxed with SEG28~SEG30, DC31.
Port IOC 4 pins (with internal pull-low, low-level-hold, chattering prevention clock).
Port IOD 4 pins (with internal pull-low, chattering prevention clock).
4. 8-level subroutine nesting.
5. Interrupt function.
External factor 4 (INT pin, Port IOC, IOD & KI input).
Internal factor 4 (Pre-Divider, Timer1, Timer2, RFC).
6. Built-in Alarm, Frequency or Melody generator.
7. BZB, BZ (Mux with IOB3/SEG30, IOB4/DC31).
8. Built-in R to F Converter circuit.
CX, RR, RT, RH (Mux with IOA1~IOA4/SEG24~27).
9. Built-in KEY_BOARD scanning function.
K1~K16 (Share with SEG1~SEG16).
KI1~KI4 (Mux with IOC1~IOC4).
10. Two 6-bit programmable timers with programmable clock source.
11. Watch dog timer.
12. LCD driver output.
32 LCD/LED driver outputs (up to 256 LCD segment drivable).
1/2 ~ 1/8 Duty for LCD/LED.
1/2 Bias or 1/3 Bias for LCD/LED selected by option.
Single instruction to turn off all segments.
Option is used to select COM5~8, DC9/OD9, SEG17~ SEG23,
DC31/OD31,SEG40, SEG41,as DC outputs/P_open drain.
32 LCD address.
13. Built-in Voltage doubler, halver charge pump circuit.
14. Dual clock operation, and X’tal type slow oscillation, and fast
oscillation can set 3.58 MHz ceramic resonator, internal R or external R by switch option.
15. HALT function.
16. STOP function.
17. ROM code protect fuse.
